Milwaukee pH600 är en kompakt digital pH-mätare som mäter i området 0.0 till +14,0 pH med en noggrannhet på ±0,1 pH och en upplösning på 0,1 pH. Batterier, skruvmejsel för kalibrering och instruktioner medföljer. Kalibreringsvätska och storage solution rekommenderas att köpa till.

OBS! Vi rekommenderar att köpa till Storage Solution och pH-kalibrering: en bas och en syra.

Design features
- Fast, accurate results with digital LCD readout.
- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
- Simple 1 point calibration with an easy-to-use trimmer located on the back of the tester to protect from accidental splashes.
- Cap to protect the pH sensor and keep it wet when stored upright.
- Low power demand for extended battery life (batteries included).
- Comes in a hard carrying case complete with calibration screw driver, batteries and instructions.

Specifications
pH range: 0.0 to 14.0 pH
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Typical EMC Deviation: +/- 0.2 pH
Calibration: Manual, 1 Point
Environment: 32°F to 122°F (0 to 50°C) 95% RH
Approximate dimensions: 6 x 1.2 x 0.95 inches
Weight: 3 ounce
Battery Type: 3 x 1.5 V Alkaline (included)
Battery Life: 700 hours

Use and care
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Pen will give you fast, accurate results for longer.

Here are our top four tips.
1. Always store upright with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Pen regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Pen in the sample for a faster result.

Recensioner