Vattentät (IP67) digital pH-mätare med extra hög noggrannhet. Mäter i området -2,00 till +16,00 pH med precision 0,01 pH. Automatisk temperaturkompensation (ATC) vid -5 till +60 °C. Visar även temperaturen i området -5 till +105 °C med upplösning 0,1 °C. Två kalibreringspunkter. Batterier, buffertlösningar för kalibrering medföljer (4,01 pH och 7,01 pH) samt manual ingår.

Elektroden bör aktiveras med och sedan förvaras i förvaringsvätska för digitala pH-mätare. Köps separat.

DESIGN FEATURES
- Fast easy to read results with large digital dual LCD readout
- Extreme pH accuracy to  ±0.05 pH with an extended pH range (-2.00 pH to 16.00 pH)
- Lightweight and portable
- Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading
- Simple push button, automatic one or two-point calibration with 6 saved calibration points
- Gel-filled, double junction pH electrode for low maintenance and high performance
- Auto shut off and low power demand for a 300 hour extended battery life (batteries included)

SPECIFICATIONS
pH Range: -2.00 to 16.00 pH
Temp Range: -5.0 to 60.0°C / 23.0 to 140.0°F
pH Resolution: 0.01 pH
Temp Resolution: 0.1°C / 0.1°F
pH Accuracy: ±0.05 pH
Temp Accuracy: ±0.5°C / ±1°F
pH: Typical EMC Deviation ±0.02 pH
Temp: Typical EMC Deviation ±0.3°C / ±0.6°F
Calibration automatic, 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)
Temperature Compensation: Automatic from -5 to 60°C
Probe: Replaceable double junction for extended life (Mi56P)
Environment: -5 to 50°C / 32 to 122°F; max RH 100%
Battery Type: 4 x 1.5V; IEC LR44, A76 (included)
Battery Life: Approx. 300 hours of use
Auto-off: After 8 minutes of non-use
Dimensions: 7.9 inches × 1.5 inches (diameter)
Weight: 3.5 ounces

CARE AND USE
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

Nedladdningsbara filer


Du kanske även behöver


Låt andra veta vad du tycker om Milwaukee pH56 PRO Vattentät pH & Temperatur-mätare med ATC