Milwaukee pH55 PRO är en vattentät (IP67) digital pH-mätare. Mäter i området -2,0 till +16,0 pH med precision 0,1 pH. Automatisk temperaturkompensation (ATC) vid -5 till +60 °C. Visar även temperaturen i området -5 till +105 °C med upplösning 0,1 °C. Två kalibreringspunkter. . Batterier, buffertlösningar för kalibrering (4,01 pH och 7,01 pH) samt intruktioner medföljer.

Fast easy to read results with large digital LCD readout.
Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).
Resolution to 0.1 pH.
Lightweight and portable.
Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.
Simple Automatic one or two-point calibration.
2 Sets of pre-memorized buffers.
Gel-filled, double junction pH electrode for low maintenance and high performance.
Over 300 hours of battery life (batteries included).
Fully waterproof to IP65.
Replaceable pH electrode Mi56P.

pH Range: -2.0 to 16.0 pH
Temperature Range: -5.0 to 60.0°C (23 to 140°F)
pH Resolution: 0.1 pH
pH Accuracy: ±0.1 pH
Temperature Accuracy: ±0.5°C (±1°F)
Typical EMC Deviation: ±0.1
Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)
Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)
Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)
Probe: Replaceable double junction for extended life (Mi56P)
Environment: -5 to 50°C / 23 to 122°F; max RH 100%
Battery Type: 4 x 1.5V; IEC LR44, A76 (included)
Battery Life: Approx. 300 hours of use
Auto-off: after 8 minutes on non-use
Dimensions: 254 × 67 × 47 mm
Weight: 99.22 g

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution MA9015 not water.
2. Clean your Tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the Tester in the sample for a faster result.

Nedladdningsbara filer

Du kanske även behöver

Låt andra veta vad du tycker om Milwaukee pH55 PRO Vattentät pH & Temperatur-mätare med ATC