FermZilla, the new and improved Fermentasaurus Gen2 (renamed to FermZilla), brought to you by the critical key minds and engineers behind the original Gen1, but with all the tweaks that make it the most cost effective conical fermenter to date!

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyones budget. With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.

This is an incredible product at an extremely attractive price point and available in FermZilla 27L, 35L and FermZilla 55L sizes.

Add the optional pressure kit to your FermZilla and turn your FermZilla into a true uni tank. Uni tanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. This extremely inexpensive upgrade will truly show you what the FermZilla was designed for.

These units were designed for use with CO2.

New and Improved:
1. Larger Dump Valve
2. Larger opening
3. Pressure rating 2.4bar (35psi)

In The Box
1 x FermZilla 27L Tank with Butterfly Dump Valve Parts (Pre-Assembled & Attached)
1 x Reinforced Stainless Steel Stand with Handles
1 x Top Lid with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
1 x Top Lid Screw Cap
1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
1 x KegLand Adjustable Easy Opening Tool
1 x Premium 3 Piece Airlock
1 x Approximate Graduations Sticker
3 x Black Bottle Caps (Attached)
1 x Grommet Bottle Cap (Airlock Port)

Collection container lid is not pressure rated*

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

To download the instruction sheet for this product click on the link below:
FermZilla - PDF Instruction Manual

Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.

Du kanske även behöver

  • FermZilla Carbonation/Cleaning Cap

    FermZilla Carbonation/Cleaning Cap

    Passar till CO2/Öl Ball Lock-koppling. Rengör enkelt slangar eller tvångskolsyra öl på PET-flaska. Skruva fast på t.ex en PET-läskflaska med...
    179 kr
  • FermZilla Starter Kit 35L Jäskärl

    FermZilla Starter Kit 35L Jäskärl

    FermZilla, the new and improved Fermentasaurus Gen2 (renamed to FermZilla), brought to you by the critical key minds and engineers behind the original...
    1 549 kr 2 099 kr

Våra kunder säger

  • Olof O.
    Se till att skaffa ett pressure kit och något smörjmedel till gängorna. Håller tätt och ger dig möjlighet att jäsa under tryck, resultat blir underbart.

Låt andra veta vad du tycker om FermZilla Starter Kit 35L Jäskärl